Inserisci una parola o una frase in qualsiasi lingua 👆
Lingua:
Traduzione e analisi delle parole tramite l'intelligenza artificiale ChatGPT
In questa pagina puoi ottenere un'analisi dettagliata di una parola o frase, prodotta utilizzando la migliore tecnologia di intelligenza artificiale fino ad oggi:
- come viene usata la parola
- frequenza di utilizzo
- è usato più spesso nel discorso orale o scritto
- opzioni di traduzione delle parole
- esempi di utilizzo (varie frasi con traduzione)
- etimologia
Cosa (chi) è lamination$43168$ - definizione
Ending lamination theorem
In hyperbolic geometry, the ending lamination theorem, originally conjectured by , states that hyperbolic 3-manifolds with finitely generated fundamental groups are determined by their topology together with certain "end invariants", which are geodesic laminations on some surfaces in the boundary of the manifold.
Nanolamination
Nanolamination is the production of materials that are fully dense, ultra-fine grained solids that exhibit a high concentration of interface defects. The properties of fabricated nanolaminates depend on their compositions and thicknesses.
Lamination
![A flexible [[thin-film solar cell]] for aerospace use (2007).](https://commons.wikimedia.org/wiki/Special:FilePath/Aerospace Product-Flexible Thin-Film Solar PV-United Solar Ovonic.jpg?width=200 "A flexible [[thin-film solar cell]] for aerospace use (2007).")
TECHNIQUE OF FUSING LAYERS OF MATERIAL
Laminating; Plastic laminate; Laminated; Laminator; Laminates; Laminations; Laminate; Laminated material
The building up of an armature core or other thing out of plates. The
cores of dynamo armatures or of alternating current converters are often
laminated. Thus a drum armature core may consist of a quantity of thin
iron discs, strung upon a rod and rigidly secured, either with or
without paper insulation between the discs. If no paper is used the film
of oxide on the iron is relied on for insulation. The object of
lamination is to break up the electrical continuity of the core, so as
to avoid Foucault currents. (See Currents, Foucault.) The laminations
should be at right angles to the direction of the Foucault currents
which would be produced, or in most cases should be at right angles to the active parts of the wire windings.
which would be produced, or in most cases should be at right angles to the active parts of the wire windings.
